SLAB FORMWORK

ALU FRAME 50KN/L

HTS FRAME 48KN/L

MODUDECK

MEGASHORE SLAB FORMWORK

A FRAME FLY FORM

HV SLAB FORMWORK

ALU Frames are lightweight, durable and high capacity aluminum shoring frames. Aluminum has proven to withstand job site wear and tear, enabling a longer period of use.

 

ALU Frames fulfill the optimum requirements for capacity, weight, durability and handling during construction.

 

ALU Frames achieve reduction in the overall cost of forming, based on increased productivity and decreased physical exertion of construction workers.

ALU Frame 4 x 3

Part No. 1043
Size: 4’-0” x 3’-0” (1.22m x 0.91m)

Weight: 19.0 lb (8.6 kg)

Cross Brace Pin Spacing: 2’-0” (0.61m)

ALU Frame 4 x 5

Part No. 1045

Size: 4’-0” x 5’-0” (1.22m x 1.52m)

Weight: 28.5 lb (13.0 kg)

Cross Brace Pin Spacing: 4’-0” (1.22m)

ALU Frame 4 x 4

Part No. 1044

Size: 4’-0” x 4’-0” (1.22m x 1.22m)

Weight: 22.0 lb (10.0 kg)

Cross Brace Pin Spacing: 2’-0” (0.61m)

ALU Frame 4 x 6

Part No. 1046

Size: 4’-0” x 6’-0” (1.22m x1.82m)

Weight: 32.0 lb (14.5 kg)

Cross Brace Pin Spacing: 4’-0” (1.22m)

ALU Frame 4 x 8

Part no. 1048

Size: 4'-0 x 8'-0 ( 1.22m x 2.44m)

Weight: 48.9 lb (22.2 kg)

Cross Brace Pin Spacing: 2'/4'/6' (0.61m,1.22m,1.83m)

National Forming Systems Inc. HTS Frame was developed as a result of a long term study of the construction need to accommodate optimal demands between:

 

  • High Capacity
  • Durability
  • Easy Handling

 

The result is an economical and time saving HTS Shoring System.

HTS Frame 4' x 2'

Part No. 2042

Size: 4'-0" W x 2'-0" H (1.22m x 0.61m)

Weight: 24.00 lb (10.90 kg)

Single Drop Lock

HTS Frame 4' x 3'

Part No. 2043

Size: 4'-0" W x 3'-0" H (1.22m x 0.91m)

Weight: 29.00 lb (13.95 kg)

Drop Lock Spacing 2'-0" (0.61m)

HTS Frame 4' x 5'

Part No. 2045

Size: 4'-0" W x 5'-0" H (1.22m x 1.52m)

Weight: 45.00 lb (20.40 kg)

Drop Lock Spacing 4'-0" (1.22m)

Our lightweight Modudeck system consists out of the following main components:

 

Panels including the plywood are available in standard sizes 180x60cm, 120x60cm and 60x60cm, Main Beams with lengths 240cm, 180cm, 120cm,  Props which can be Mega Shores or props from our DIN EN 1065 program.

 

By using the system  dropheads which are being mounted onto the props, early striking can be utilized to move the panels and beams already to the next use on site, while the props are still fully engaged and supporting the slab.

 

Mega Shores represent a new generation of single support shoring equipment. They were developed as a result of demand for an economical, lightweight and versatile shoring system that could substantially save man hours and increase productivity.

 

Forming area ratio to man hours is cut in half as Mega Shore capacity is almost double than other single prop equipment with low Mega Shore weight factor to capacity.

 

Mega Shores are made of aluminum alloy with base plates welded to one end of the inside and outside tube. Outside tube is powder coated while the inside tube is plain aluminum with four self-cleaning treaded wings and free-running cast iron nuts.

 

Mega Shores combined with lateral bracing can be used as shoring tower having a higher capacity than as a single support. Outside and Inside Tube each has four opposite slots for connection to lateral bracing members. Lateral bracing can be done with Cross Braces or Bracing Frames connected to the outside or inside tube with NFS Beam.

Bracing Frame 150

Lateral bracing with

Cross Braces

Lateral bracing with

Bracing Frame

Spacing between Mega Shores is not predetermined by size of brace.

Bracing Frame 180

Cross Brace connection

A-Frame Fly Form System is a type of concrete forming widely used for supporting cast-in-place concrete slabs in high-rise construction.

 

The method of table relocation gives this concrete forming system the name A-Frame Fly Form System and the tables, A-Frame Fly Form Tables.

 

A-Frame Fly Form design meets the demand of today’s challenging environment that requires a flexible and time saving construction system.

 

It is fully adaptable to the configuration and shoring height of a slab and much lighter and cost efficient compared to conventional trusses.

Variable Capacity

The unique variable spacing between A-Frames controls the capacity of the truss. When A-Frames are moved close to each other, truss capacity increases, supporting the heavier concrete weight. Alternately, when A-Frames are moved apart, truss capacity decreases for lighter concrete weight.

 

Capability of A-Frame to connect to top and bottom truss chord at any required location for truss lengths, from 15ft to 100ft, and capability to position Hinged Table Leg at any location of Bottom Chord is the key to capacity and overall effectiveness of A-Frame Truss structure.

HV Main and Secondary Beam features:

  • Lightweight aluminum members.
  • Designed for easy, safe and fast handling.
  • Timber nailers included in all members.
  • Exceptionally durable.
  • Standard Main Beam: 5' 7" @ 30.4 lbs. (1.7 m @ 13.8 kg)
  • Fillers: 3'9" @ 20 lbs (1.15 m @ 9.4 kg)
  • Cantilevers: 11'6" @ 63 lbs. (3.5 m @ 28.6 kg)
  • Standard Secondary Beam: 5' 7" @14 lbs. (1.7 m @ 6.2 kg)
  • Fillers: 3'9" @ 7.8 lbs. (1.15 m @ 3.5 kg)

Secondary Beam

Drophead

HV Shores

  • Durable, telescoping steel shores
  • Supports slabs in excess of 12" (300 mm)
  • Height Range: 7'0" – 18'10" (2.15 m – 5.75 m)

HV Main and Secondary Beam Components:

  • Hot–dip galvanized.
  • Attaches to Post Shores with 2 bolts.
  • Includes quick–release disc wedge.
  • Allows stripping in tight quarters.

Main Beam

Simple filler conditions

Nesting Main & Secondary Beams

Accommodates framing irregularities by rotating members and eliminating cutting or lapping.

ALU FRAMES 50 KN/LEG

DOWNLOAD BROCHURE

HTS FRAMES 48 KN/LEG

DOWNLOAD BROCHURE

modudeck
Panelized Slab Forming System with Drop Heads

DOWNLOAD BROCHURE

megashore slab formwork

DOWNLOAD BROCHURE

a-frame fly form TIME-SAVING SLAB FORMING SYSTEM

DOWNLOAD BROCHURE

hv slab formwork

DOWNLOAD BROCHURE

 

7411 Vantage Way, Delta, BC, V4G 1C9

©2017 National Forming Systems Inc.